Electrical panel labels with your name on every job
Circuit directories, service stickers and arc-flash warning labels for electrical contractors. Send the circuit list, approve one proof, and every panel you finish carries your company name and phone number.
The label your customer reads when something trips
A panel label gets read at the exact moment your customer needs an electrician. We design panel labels in Buffalo, MN for electrical contractors and produce them with trusted print partners: circuit directories set from your own circuit list, service stickers that tell the owner who to call, and arc-flash warning labels. Your header is set up once, so a repeat order only needs the next job's circuit list and quantities.
- Set from your list
Send the spreadsheet or Word file you already use and we set every circuit.
- One proof per job
Every version and its quantity on one page, approved before anything prints.
- Ready for the next job
Your logo and header stay on file for repeat orders.
Spec your labels
Production time: made to order; production time depends on the size, the number of versions and the quantity, and we confirm a delivery date with your proof.
Get a free quote →Common panel labels
| Label | Size | What goes on it | Best for |
|---|---|---|---|
| Circuit directory | 4.5 x 9 in | Your header, the voltage and phase color key, and a 24 or 30 circuit table | Panel doors on new installs and remodels |
| Service sticker | 3 x 5 in | Your logo, company name and phone number | The front of every panel you install or service |
| Arc-flash warning | 4 x 4 in | The hazard warning and the details your team supplies | Switchboards and panelboards in commercial buildings |
| Your size | Any size | Quoted job by job | Anything else you have in mind |
These sizes are examples, not limits. A job can carry several versions, one for each panel, each with its own quantity. Our standard panel labels are gloss laminated and die cut with rounded corners. Tell us the sizes and quantities and we will quote it.
Pick the labels for the job
- Circuit directory
Lists what every breaker serves. The National Electrical Code asks for one on or next to every panelboard (NEC 408.4), and a printed directory is far easier to read than handwriting on the door.
- Service sticker
Your logo and phone number on the front of the panel, so the owner knows who to call next time. Put one on every panel you install or service.
- Arc-flash warning
Switchboards and panelboards outside of homes that may be serviced while energized need an arc-flash warning label (NEC 110.16). We print it with the details your team supplies.
- Mechanical and HVAC labels
Glycol and condensate line labels, valve tags and equipment stickers for mechanical contractors.
From circuit list to panel door
- Send your circuit list. The spreadsheet or Word file you already use, one table per panel, with the quantity for each.
- We set up your header once. Your logo, company name, phone number and the voltage and phase details you want on every label.
- You approve one proof showing every version side by side with its quantity.
- It goes to production. Your labels are printed and cut to order from the approved proof.
- Reorders are simple. Send the next job's circuit list and quantities. Your header is already on file.
Your name on the whole job
Why contractors choose Shift
- Design and print together
One local studio sets up your labels and manages the run.
- Every version proofed
You approve every panel's label before anything prints.
- One point of contact
Setup through delivery, handled by one local studio.
- Local & personal
Based in Buffalo and serving Wright County, the West Metro and Central Minnesota.
Panel label FAQ
Each circuit, identified by what it serves. The National Electrical Code asks for a circuit directory on the face of the panel, inside the door or in an approved spot next to it (NEC 408.4). You supply the circuit list and we print it exactly as you approve it on the proof.
Yes. Equipment such as switchboards and panelboards in buildings other than homes needs an arc-flash warning when it may be serviced while energized (NEC 110.16). We print the labels with the details your team provides, sized to fit the equipment.
3 x 5 in is a common size for a who-to-call sticker on the front of a panel. It fits your logo, company name and phone number where the owner will see it. We can print any size.
Yes. Send the file you already use, with one table per panel and the quantity for each. We set the labels from it and show every version on the proof.
No. Your header is set up once and kept on file, so a repeat order only needs the next job's circuit list and quantities.
Yes. We also print glycol and condensate line labels, valve tags and equipment stickers for mechanical contractors. Send the sizes and quantities for a quote.
They are made to order. Production time depends on the size, the number of versions and the quantity, and we confirm a delivery date with your proof.
It depends on the size, the number of versions and the quantity, so we quote each order on its own. Send the sizes and quantities for a free quote.
Who buys this & helpful tools
What customers say
SHIFT made us a ton of vinyl banners for our company and did a fantastic job. They were quick and had good attention to detail. They really care about how their prints will turn out and always went the extra mile ensuring me the sizing and image quality was going to work for my prints.
Luke is great to work with! Professional, responsive, and full of great ideas. Highly recommend!
Ready to order?
Tell us what you need and we'll put together a custom quote. No cost, no commitment.