Dimensional letters

PVC letters painted any color, for interior walls

Flat-cut PVC letters and logos for lobbies, offices and photo-op walls. The face and edges are painted in a stock color, metallic silver or gold, or your brand color. PVC costs less than aluminum or mirror letters, and we ship anywhere in the U.S.

5.0 on GoogleLocal studio since 2015
About the product

Clean, deep letters in your colors

PVC is a solid, lightweight plastic. We cut it into your letters and logo, and the face and edges are painted in one color. From across a room the letters look crisp and deep. PVC letters are for interior walls only, and they are a great fit for lobbies, offices and photo walls.

  • Painted face and edges

    About 50 stock colors, metallic silver and gold, or a custom match.

  • 1/4 to 1 1/2 in thick

    1/2 in is the depth we quote most for lobby letters.

  • Template in the box

    A full-size printed mounting template with studs, standoffs or VHB tape.

Options

At a glance

Stock colorsMetallic silverMetallic goldCustom PMS matchPrinted face logoGloss, matte or satinFlush studsStandoffsVHB tapeInterior only

Typical turnaround: made to order; production time depends on the material, and we confirm a ship date with your proof.

Size it first with our letter height calculator, or send a photo of the wall for a free proof.

Get a free quote →
Specs

Thickness, size & color

PVC letter options
OptionWhat is offeredGood to know
Thickness1/4, 3/8, 1/2, 3/4, 1 or 1 1/2 in1/4 in costs less than 1/2 in and sits as deep as 1/4 in aluminum.
Letter height2 to 72 in, in whole inchesLetters start at 3 in once the stock is 3/4 in or thicker.
Logo pieces2 to 95 in wide or tallA logo mark is cut as one shaped piece.
Stroke width0.188 in minimum with a plain back, 0.25 in with tape or studsWe check every stroke on your proof.
Stock colorsAbout 50, including metallic silver and three goldsMetallic colors cost no more than white.
SheenGloss, matte or satinMetallic silver defaults to matte.
Custom colorOne color matched to your PMS numberSeveral custom colors are reviewed job by job.
Printed faceFull-color print on the face of a logo pieceFor marks with several colors or a gradient.
Mounting

Studs, standoffs or tape

Flush studs hold the letters tight to the wall with nothing showing. Studs with standoffs float them off the wall for a shadow line, and they cost no more than flush studs. VHB tape is for interior walls when you would rather not drill.

PVC letters ship with their mounting hardware and a full-size printed template. For stud letters, the template marks every hole. For tape letters, it shows where each letter goes.

One we made

A 36 in script logo in 1/2 in PVC, painted face and edges in the client's brand color, sized to fit inside a framed photo-op wall. We sized it to the frame opening, not the outside of the frame, so the logo had room to breathe.

Free proof

See your letters at real scale first

Send a photo of your wall and we'll send back a free proof with your letters at real scale. It is an 11 x 8.5 in sheet with your letters drawn to scale on your wall color, the overall width and height, each letter height, and the material and mount spelled out. No cost and no commitment.

Get a free proof →
How ordering works

From logo file to your wall

  • 1. Send the logo and the wall

    Your logo file and a photo of the wall with a tape measure in it. No clean file? We can redraw it.

  • 2. Free proof and quote

    We draw the letters to scale on your wall color, with every dimension marked, and quote the sizes you want to compare.

  • 3. Approve, then production

    You sign off on size, color, thickness and mount. We confirm the ship date with the proof.

  • 4. Ships ready to hang

    It arrives with the template and hardware. Hang it yourself, or we install it around Buffalo and the Twin Cities.

Ships anywhere

Made to order, shipped anywhere in the U.S.

We make these to order and ship them anywhere in the U.S. Every order comes with a full-size printed mounting template and the hardware its mount needs: studs, standoffs or VHB tape. So you, your maintenance staff or your contractor can put them up. Around Buffalo and the Twin Cities, we can also install interior letters for you, and a travel fee may apply farther out. Outdoor letters go up with the same template, by you or your installer.

FAQ

PVC letter FAQ

PVC or aluminum letters?

PVC is the more affordable choice and comes painted in almost any color, including metallic silver and gold. Aluminum is solid metal with a brushed or anodized finish. At the same 1/4 in depth they sit the same distance off the wall. If the letters need to match a brand color, PVC is usually the easy pick.

Can PVC letters go outside?

No. PVC letters are for interior walls only: lobbies, offices, hallways and photo walls.

Are the edges painted too?

Yes. Paint covers the face and the edges, so each letter reads as one solid color. Up close, the cut edges have a slight texture under the paint next to the smooth face.

Can you match our brand color?

Yes. Pick from about 50 stock colors, or we match one custom color to your PMS number. The stock palette has no true pinks, so a pink brand color is a custom match. Logos with several colors or a gradient can get a full-color printed face instead.

Can we hang PVC letters ourselves?

Yes. Every order ships with a full-size printed mounting template and the hardware its mount needs: studs, standoffs or VHB tape. Tape the template to the wall, drill where it marks, and set the letters. Around Buffalo and the Twin Cities, we can also install interior letters for you, and a travel fee may apply farther out. We install interior letters only; outdoor letters go up with the same template, by you or your installer.

How much do PVC letters cost?

Letter height, thickness and font drive the price, so we quote each job. PVC costs less than aluminum or mirror letters, and 1/4 in costs less than 1/2 in. Send your logo and the wall width and we'll quote sizes side by side, free.

Real customers

What customers say

They took the time to truly understand our vision and mission in the Veteran/Military community and transformed it into an amazing visual identity that perfectly reflects who LockLeed International is. Every detail from the logo, website, and wall murals in the office felt intentional and professional. … In a nutshell.... Shift Design gets it!

John Henka LockLeed International

I have had the opportunity to work with Luke for a number of years and can confidently say he is second to none. He takes the time to actually get to know his customers so he can deliver custom branding solutions. His prompt service, reasonable solutions, and thoughtful creativity have elevated our brand.

M H

Ready to order?

Tell us what you need and we'll put together a custom quote. No cost, no commitment.